Every slab we sell is one specific piece of wood, sawn from a mid-Missouri tree at our mill near Columbia, with its own length, width, thickness, dryness and price. Know those numbers and you can tell whether a slab fits your project before you make the drive.
If you need a size, send it on the request form and we'll reply with what fits.
Start with length and species
Start with length and species. Length is the first thing to check, because a slab can always be cut shorter but never longer. Width comes next: a slab that's 24 inches at one end can be 16 inches at the other.
If you're not sure which wood you want, our slab species comparison covers color, hardness and how much each species moves.
How to read a listing
A useful slab listing gives you:
- Species. The tree it came from.
- Length. End to end, along the longest straight line.
- Width at the narrow and wide points. Live edges wander, so one width figure isn't enough. Average the two for a rough board-foot figure.
- Thickness. As sawn, or after flattening if it has been flattened.
- Moisture reading and date. A meter reading, and when it was taken. A reading from last spring is not a reading from this week.
- Flattened or rough. Rough means saw marks and some cup or twist; plan to flatten it yourself or have it done.
- Price. For that one slab, not a rate you have to work out.
- Source town. Where the tree grew, when we know it.
- Slab ID. Quote it when you ask about a slab.
Not sure whether a reading is dry enough for your project? Our guide on how to check if a slab is dry explains what the numbers mean, and why slabs crack and cup covers which defects matter.
Bookmatched sets
A bookmatched pair is two slabs sawn one after the other from the same log. Open them like a book and the grain mirrors across the center seam. That's how most wide tables get built from trees that aren't wide enough for a single slab, and it's the usual starting point for an epoxy river table.
Matched slabs are best bought as a set, since splitting them ruins the match. See choosing a slab for an epoxy river table if that's your project.
Don't see your size?
Tell us what you need. Slabs come and go, and the right one may be drying or still in a log.
Send the finished length and width, the thickness you want, a species if you have one in mind, and your budget. We'll reply with slabs that fit, or tell you when one might come off the mill.
Ask About a Slab
Found one you like, or need something that isn't here? Send us the slab ID or the size you need.